PCD80XH is Now Available!
Posted on February 11, 2019
S&P is proud to announce that the new Premium CHOICE model which features the most efficient DC motor is now available. This unit uses the most energy-efficient motor to improve indoor air quality by exhausting contaminants and excess moisture that can cause health issues, mold growth, and structural damage over an extended period. For more information about this product click here.
The Most Energy Efficient Product Line
Posted on January 9, 2019
Soler and Palau have been producing quality, environmentally sustainable ventilation products and systems for over 60 years in more than 90 different countries around the world. To emphasize this movement in technological advancements, S&P has developed the Ecowatt® standard to classify energy-efficient products that use EC or DC motors. Models that fall under this standard have a certified performance through AMCA or HVI. If the products’ designed for residential applications the model must maintain an ENERGY STAR® qualification.
For more information about the Ecowatt® Standard, click here.
Our Most Efficient reFresh Fans Keep Getting Better!
Posted on January 9, 2019
In 2018 S&P released the reFresh series with its sleek, compact design and energy efficient motor to help improve the indoor air quality of residential and multi-family dwellings. This year, ENERGY STAR® has recognized our RF10-160EC, RF10-160EC-ES24V, RF10-160EC-P, and RF10-160EC-P-ES24V models as the Most Efficient of ENERGY STAR 2019.
The ENERGY STAR Most Efficient Mark is considered an extension of the ENERGY STAR brand and is designed to recognize and advance the most efficient products among those who qualify for the ENERGY STAR. This recognition is awarded each year to products that meet specific criteria set by the U.S. Environmental Protection Agency (EPA) and are considered ENERGY STAR Most Efficient.
Products identified in 2019 as being "ENERGY STAR Most Efficient" prevent greenhouse gas emissions by meeting rigorous energy efficiency performance levels set by the EPA.
New Centrifugal Power Roof Ventilators
Posted on January 4, 2019
S&P has recently redesigned our Centrifugal Power Roof Ventilators to make them available in larger sizes with higher pressure options that are more economical and well prepared for coming energy efficiency regulations. With this redesign, we are discontinuing the DB, (e)RED, TXB, and TXD models and replacing them with the S-Series, equivalent model.
Use the below chart to see what models are replacing which product.
|Discontinued Model||Replacement Model|
New Solutions to Improve Indoor Air Quality
Posted on December 6, 2018
With today's buildings being tighter and more energy efficient S&P has worked extensively to develop a new outside air solution to improve the indoor air quality or IAQ of your residence. The EPA (epa.gov) has stated that IAQ is often two to five times worse than outdoor air, and that indoor air pollution is among today’s top five most significant risks to public health which brings us to the notion that IAQ is essential to the health of the home and its inhabitants.
For more details about how S&P’s Products can work to improve your Indoor Air Quality, please feel free to download our latest Outside Air Solution brochure.
INTELLIVENT — Fans That Think For Themselves
Posted on December 4, 2018
The INTELLIVENT system from S&P is an energy efficient, balanced whole house ventilation solution in compliance with ASHRAE 62.2. Intellivent combines a low profile bathroom exhaust fan, outside air motorized damper kit, and relay into one quick solution that will improve the Indoor Air Quality of your home or business. These three components work side-by-side to provide a cost-effective balance of fresh air inside the dwelling. This low-cost solution includes everything you need for a simple, yet effective clean air supply and bathroom exhaust system within any home or business. INTELLIVENT — Fans That Think For Themselves!
New Premium CHOICE Series Product is Coming Soon!
Posted on November 15, 2018
The PCD80XH is a new addition to the Premium CHOICE Series that will be a low profile unit similar to the PCD110X but, in a smaller size. The Premium CHOICE fans feature the most DC motors available to help improve indoor air quality and increase your home’s durability by quickly exhausting contaminants and excess moisture that can cause health issues, mold growth, and structural damage. Look for this new product to be available soon to distributors near you.
New Multispeed Control
Posted on November 1, 2018
The EC Motor Multispeed Control is an interface for setting and switching between two independent motor speeds. This control is used when applications require high- and low-speed operations in restaurants, condos, schools and other facilities where manual/demand control ventilation is needed.
This multispeed control is now available with the STXDe, STXDeRHUL, SDBDe, eGED, eGSD, and eSQD units.
New reFresh Value Series
Posted on October 3, 2018
Our new reFresh Value Series is a simplified version of the reFresh Full Size and Low Profile models. Like these models, the value series introduces fresh air from the outside into the residence making this model an efficient choice with an economic advantage. The model is specially engineered to meet building and energy codes that call for ASHRAE 62.2 (2010), IRC (2012/2015), and IMC (2012/2015) requirements.
Click here for more information.
New MD6-ES24VK Product Kit
Posted on June 26, 2018
Our new Outside Air Kit combines the MD6 (our 6" motorized damper) with the ES24V (the temperature and humidity monitoring control). The control can command the central HVAC blower to help distribute fresh air through the existing duct work if necessary. It can be programmed to allow outside air to enter intermittently when the temperature is inside of your set temperature and humidity parameters. This prevents hot, humid, or freezing air from flooding your house all at once, while still meeting code.
This combination will help you meet the following codes:
- ASHRAE 62.2 - 2010 & 2013
- IRC 2012 & 2015
For more information select the IOM or Submittal buttons below.
Posted on June 21, 2018
New Premium CHOICE Website
The Premium CHOICE Series offers many options, benefits, and accessories. Due to the vastly growing Premium CHOICE product line, we have created a website where you can learn more about our high quality, long lasting, energy efficient PC fans and their Plug-&-Play Options such as the unique IAQ Sense VOC and Humidity Sensor.
Go to www.premiumchoiceseries.com to find installation and wiring videos, IOMs, submittals, Revit files, dimensional drawings, and more. We hope you find the new site helpful!
reFresh: S&P's New Outside Air Solution
Posted on April 12, 2018
S&P Canada announces the launch of our newest dedicated supply fans and more! The reFresh series is specifically engineered to meet today's outside air codes and the ASHRAE 62.2 Whole-House Ventilation Requirement.
S&P Canada's New and Improved Kitchen Supply Fan!
Posted on April 2, 2018
S&P Canada is excited to launch our new KSFV Kitchen Supply Fan. The KSFV fans are roof curb or curb cap mounted filtered supply fans rated from 475 to over 12,500 CFM, with static pressure capabilities to 2-1/2". They are specifically designed for non-tempered, filtered make-up air in kitchen hood applications.
KSFV construction includes galvanized construction to provide maximum weather protection, long life and the utmost in performance efficiency. The forward curved centrifugal blower provides efficient airflow at low sound levels with static pressure capabilities to handle ducted air systems or hoods within a building. The filters are washable and are reusable to reduce maintenance costs.
Click here for more information.
Product Discontinuation Announcement
Posted on March 6, 2018
Effective March 31, S&P Canada Ventilation Products, Inc. will discontinue the DB & TXB (all variations) sizes 24-30, and the KSF series (all sizes). This discontinuation is due to the availability of new models and series that are direct replacments. Below is a chart with a cross from discontinued products to all new products.
Please note the DB and TXB (all variations) have now been discontinued up to size 20 and the March 31 discontinuation extends the size range to include sizes 24 and 30.
On March 31, 2018, we will remove the discontinued models from Optisizer for selection. Any orders placed after April 1 for the discontinued models listed below will be automatically switched to the replacement series equivalent models. Please note any conversion from the old series to the new series at time of the order may incur extra charges due to differences in pricing and accessory options. At this time we recommend you take the following steps:
- Review your open projects in Optisizer for quotes of the discontinued models
- Edit your projects to remove the discontinued models and re-quote using the replacement models
- If you are unable to convert a saved project due to engineering approvals or other reasons contact your S&P Regional Manager immediately to request approval from S&P to honor your quote for the old model for an agreed upon time frame.
We will honor all warranty claims on the replacement series for the published warranty periods for all discontinued products.
This discontinuation includes the following model sizes, with the replacement model sizes listed in the right-hand column:
|Series||Sizes Discontinued||Replacement Series||Replacement Series Sizes Available|
|DB||6, 8, 9, 11, 12, 14, 16, 18, 20, 24 and 30||SDB||6, 7, 8, 10, 12, 14, 15, 16, 18, 20, 22, 24, 27 and 30|
|TXB||8, 10, 12, 15, 16, 18, 20, 24 and 30||STXB||8, 10, 12, 14, 15, 16, 18, 20, 22, 24, 27 and 30|
|KSF||9, 10, 12, 15, 18 and 20||KSFV||9, 10, 12, 15, 18 and 20|
If you have any questions about the discontinuation of these products please contact your S&P Regional Manager or our Customer Service Department.
eMotors: The Ultimate Solution for Demand Based Ventilation
Posted on March 13, 2017
With increased attention on energy efficiency, our industry is evolving to more efficient motors with reduced energy consumption. S&P uses industry leading EC Motors manufactured by U.S. Motor Manufacturers. We use these motors in our downblast, upblast, square inline, and sidewall propeller fans to allow engineers to utilize the advantages of demand based ventilation without the disadvantages of extensive controls and high energy costs offered by PSC (permanent split capacitor motors).
Check back at a later date for a list of events.