worldwide
header
> Home >News
New Products
NEW Bath Fans: Premium CHOICE (PC) Series

PC50

PC80

PCLK

March 18, 2013- We are excited to announce our new Premium CHOICE (PC) Series ventilation fans. Available in 4 sizes (PC50, PC80, PC110 and PC150) the PC fans are part of our Residential/Light Commercial line of fans. The PC fans improve indoor air quality and increase your homes durability by quickly exhausting contaminants and excess moisture that can cause health issues, mold growth and structural damage.

The Premium CHOICE Series, as the name suggests, is all about the CHOICE! The fans come standard with aesthetically pleasing plastic grilles but you have the CHOICE of a Light Kit (PCLK) to turn the PC80, PC110 and PC150 into a lighted fan. If you need a humidity sensing fan, or if you need to control the speed just choose the Humidity Sensor (PCHS) or Speed Control (PCSC) respectively for all sizes. The controls and lighted grille are all "Plug-and-Play" options meaning one fan can be modified to be the exact fan needed. You even have the CHOICE to add a control or change the grille after the initial installation.   

These ENERGY STAR qualified fans are one of the most energy efficient lines and flexible line of ventilation fans available in North America.

Go to the PC Fan page go

New Model: eRED Downblast Direct Drive Centrifugal Roof Exhausters with EC Motors
eRED

July 1, 2012 - S&P announces the launch of its new Model eRED. This model features S&P’s Electronically Commutated Motors (ECM) which offer the energy efficiency of a DC motor with the ease of maintenance of Direct Drive motors. S&P’s ECM, eMotor, provides the benefit of a full speed controllable motor which can be controlled by a PC or building management system.

Model eRED fans are designed to exhaust air up to 3,000 CFM at static pressures up to 1.5” W.G. The spun aluminum exterior provides an attractive appearance the non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operations.

The eRED is ideally suited to solve ventilation challenges in multi-story buildings. When used with one of S&P’s constant pressure controls this fan model provides an energy efficient answer to venting dryers, bathrooms and kitchens in hotels, high rise buildings, institutional facilities and dormitories.

The entire line is AMCA Licensed for Air and Sound and cULus 705 Listed.

Go to eRED Product Page

New Model: TD-SILENT In-Line Mixed Flow Fans
TD-Silent

S&P Canada is excited to announce the launch of our TD-SILENT line of fans! The newest addition to our Mixed Flow family of fans, the TD-SILENT, as the name suggests, are extremely quiet, low profile “Mixed-flow” fans. Manufactured in plastic material with an external connection box, the body is easily dismantled with a two speed controllable 115V 60Hz motor. Sound waves are directed through the perforated inner skin and absorbed by a layer of sound-absorbent insulation. Plus the TD-SILENT is fitted with rubber gaskets on the inlet and outlet to facilitate installation, absorb vibrations, and provide a virtually air-tight seal.

The TD-SILENTS offer the same simple installation features as our extremely popular TD-MIXVENT fans with an integral mounting bracket, removable body, and a terminal box that can be rotated 360 degrees. The low profile of the fans makes them the ideal product for installations with low height limits, such as the case of suspended ceilings.

The new line comes with our standard 5-year warranty, so you can “fit and forget”. The TD-SILENT air performance is HVI Certified and the entire line is cULus Listed, ENERGY STAR® qualified and NAHB National Green Building Approved.

Go to the TD-SILENT Product Page

TDB - Tubeaxial Inline Belt Driven Duct Fan
TDB

MODEL FEATURES
• Rated up to 75,490 CFM in static pressure applications up to 1-1/2” w.g.
• 12 sizes ranging from 12 to 60” propeller diameters
• Motor and drives are located outside of the airstream
• Belt drives permit easy performance adjustments when needed
• Continuously welded and epoxy painted steel housing
• AMCA Air & Sound Certified
• cULus Listed

Download TDB Catalog Pages


CM July 1, 2011 - S&P Canada announces the launch of the new CM Belt Driven Utility Vents Sets. This line is available in a full range of sizes (10 through 36) providing airflow performance from 500 CFM to over 25,000 CFM with static pressure capabilities up to 5 in. w.g...Click here for full Press Release
Go to the the CM Product Page
 
News
 
NRC Motor Updates
Click here to see our policy on the NRC motor regulations.

FOR IMMEDIATE RELEASE - S&P acquires RenewAire, LLC
Click Here for More Information

We've Moved!

Ambler DriveS&P Canada Ventilation Products has outgrown the 61A Baywood facility. We have moved to a new 55,000+ square foot home at 5600 Ambler Drive (Dixie Rd & 401) in Mississauga. 5600 Ambler Drive is complete with a self contained training facility accessed from both the warehouse and from outdoors and is complete with a separate parking area. S&P training has become one of the key foundations to our success in growth.

 
Recent Events
 
 
 
 
© Copyright 2009-2012 S&P Canada
S&P Worldwide home